by Dinesh Thakur Category: C Programming (Pratical)

 A structureincludes manyvariablesinto one.Works asa Report cardthat hasname, marks and total.Therecordwould bea structure.The structurethenis used to groupa set ofsimilar datanotforming anew data type.



 
by Dinesh Thakur Category: C Programming (Pratical)

This is program that ask user to check whether the given number is odd or even. That number divided by odd number Is odd else it is even. In this program user declare required variables that are use to contain the value. And the control statement also used like if else for checking the manipulated condition. If the given digit division able with odd number then it will be odd else it will be even number.

 
by Dinesh Thakur Category: C Programming (Pratical)

In this program user checks the logic about numeric value that will it be Division able with 5 or not. To check this declares a variable of integer type. And a logic will be used along with the Modulus operator(%).that will be manipulate with the numeric value and control statement (if-else) used if the numeric value is dividable than output will be ok else it will be reverse. 

 
by Dinesh Thakur Category: C Programming (Pratical)

This is C program that ask user to check the day in week that is been selected. For this user need to declare the variables for this and the user also uses the switch statement for choice base condition to chose the day in a week. As user declare simple switch statement each case statement for every day after declaring the case statement user ask to put a number the number will be from 1-7 otherwise it will be an invalid number. default case shows the message invalid number if the number out of case that user select.

 
by Dinesh Thakur Category: C Programming (Pratical)

A given character is a vowel if it is one of the following characters: A, E, I, O and U. The switch case given below tests whether a given character is a vowel or not.

 
by Dinesh Thakur Category: C Programming (Pratical)

In this program user ask to make sum of upper and lower triangle of matrix. In this program user declare the array type Variable after declaring value to the variable if statement will be use to check whether the matrix is square or not. Else it will be going to enter elements for matrix. Loop statement will use to calculate the procedure for elements. For loop and control statements will use the procedure to make it. Then a print method will use to display the sum of upper triangle.

 
by Dinesh Thakur Category: C Programming (Pratical)

In this program, two variables of array type element declared. Which contains the value of declared variables and Loop statement will also use to be execute the situation. The loop statement will elaborate its functioning until the condition get false. The other function is to be comparing if (m! = n) that will end the functioning of add the Matrix given components must be define all the conditions true. And the result as output also displayed on the screen as well.

 
by Dinesh Thakur Category: C Programming (Pratical)

 In this program user ask to compute Sine (trigonometric function) Series. The Variable of float or integer type declared that will be use to contain the value. User asks to enter the value and then the computation of PI function described. Here term variable used for temporary value container as in the program this variable contain the x1 and then swapped for Sine. For loop statement also been used for varying the condition. Then using compatible condition the output is displayed.

 
by Dinesh Thakur Category: C Programming (Pratical)

In this program user asks to replace the string from existing one. User declares required char type variables that will be used to store the value. Here in operation mode user declare nested for loop statement in that statement user elaborate the variables that are used to functionality mode. Here in other type mode user also use if condition along within do while loop. If (l1>=l2) condition got true than do while loop will come in function. In do while condition for loop also exists for replacing the character and an if-else condition too. Condition going to be check that if the character exists in the string or not the condition got true then it will replace the character. And display the result on the screen.

 
by Dinesh Thakur Category: C Programming (Pratical)

 This is C Program Write a Magic Number Program. In this program user ask to guess whether the guessed number is correct or not. The casually in this program the Control Statement will be used like if-else. If the guessed number is equal to the number that set for variable then it’s right else it will be wrong the variable declared which use to contain the given value for condition checks out. After the condition got completed the result will be on the display.

 
by Dinesh Thakur Category: C Programming (Pratical)

In this program user ask to reverse the Entered number. User declares the required variables for storing the value. User asks to enter the number. User declares the loop statement for reversing the number. Here user also declares the swapping method for this convention like b=a%10, c=a/10, a=c. printing out the condition on display as result on the mark.

 
by Dinesh Thakur Category: C Programming (Pratical)

This is C program to check out the content is lower case or uppercase. Core concept is to show the if the content CH is lower case then Non Zero result will be display as result else the result will zero. For this user declare some required variables for containing the values. Then user define if statement along with for loop. The condition which gets the true will display as result on screen.

 
by Dinesh Thakur Category: C Programming (Pratical)

This is c program that asks user to print the number on screen. User declares some variables that use to contain the value in it. User also uses the switch statement for this execution. User ask to enter the number and in switch statement user declare for loop i=2 and <20 any number been entered the increment operator will increase i+1. Case 2 has the same condition increment operator will increase the number i+2. And default case will show the message “enter valid number“. Display the result on the screen as output.

 
by Dinesh Thakur Category: C Programming (Pratical)

In this program user ask to convey that how to pass 2d array to a function. User define value in first instance for M=3, N=5. User also declare array type variable for storing the value. User input a message that prints a matrix for and then returns a value. Next move two functions are made for passing array like fstore, fretrieve and the loop statement also declares in the function for varying the condition. Nested loop statement is been implemented for the function. And in the last result is been displayed on the screen.

 
by Dinesh Thakur Category: C Programming (Pratical)

In this program user ask to check that how to pass one dimensional Array to function. For this user declares the variable regarding to function. Like fstore, fretrieve, fedit these variables will be handy in criteria of function. User also define N value=5.User asks to enter data for matrix and return that all data. Here user make function for the every step like fstore, fretrieve, fedit that is been used along with loop statement that will vary the condition according to filled data. The all three functions are used for data passing next move the user prints the message for previous data and the symbol for skip or edit the data. Display result in the end for this one.

 
by Dinesh Thakur Category: C Programming (Pratical)

This is c program that ask user to find out the Maximum number from given digits. User declares the required variables that use to contain the value in it. User ask to enter any five values then for loop will come in exist for evaluate the condition then if condition will use to evaluate that which number is minimum and which is maximum. Then display the result on screen as output.

 
by Dinesh Thakur Category: C Programming (Pratical)

This is C Program Find the Factorial of N Number. This program is for finding the factorial of N number. Two integer type variables declared with static value one of them. Here to user enter the value for finding the factorial. Then loop statement for stepping forward to find the result and (f*I) and at last to print the output on the display.

 
by Dinesh Thakur Category: C Programming (Pratical)

This program asks user to define the Goto Command. Goto command is a skip through command in C like if any condition got terminated or false the Goto command skip the process to desired location where it sets for skipping.

 

Page 3 of 9



About Dinesh Thakur

Dinesh ThakurDinesh Thakur holds an B.SC (Computer Science), MCSE, MCDBA, CCNA, CCNP, A+, SCJP certifications. Dinesh authors the hugely popular blog. Where he writes how-to guides around Computer fundamental , computer software, Computer programming, and web apps. For any type of query or something that you think is missing, please feel free to Contact us.