You are here:   HomeComputer Graphics
by Dinesh Thakur Category: Graphics Devices

The dot pitch of a color monitor measures the size of the tiny individual dots of phosphorescent material that coat the back side of the picture tube's face. The dot pitch helps determine how sharp the image looks, independent of the resolution (which is measured in pixels). A smaller dot pitch is better.

 
by Dinesh Thakur Category: Graphics Devices

Multiscan refers to a type of computer monitor that automatically matches the synchronizing signals sent from the computer's video adapter (the video circuitry). On a standard television-type monitor, the image you see is formed by a single beam of electrons scanning lickety-split across the picture tube. The beam starts at one corner, traces a narrow horizontal line, then moves down a bit and traces the next line. The speed with which the beam travels horizontally and vertically (the horizontal and vertical "scan frequencies"), must match the synchronizing signals from the computer's video circuits.



 
by Dinesh Thakur Category: Graphics Devices

If an image is displayed on your screen or printed on the page in low-res (short for low resolution), that means you are seeing a low-grade quality. Some graphics are just low-resolution to begin with, such as graphics made in the paint file format at 72 dots per inch. Some graphics are created as complex, high-resolution images, but you may choose to display them on the screen or print them in low-res just to save time, since it takes longer for a screen or a printer to create the high- resolution version.



 
by Dinesh Thakur Category: Line Drawing Method

You know that DDA algorithm is an incremental scan conversion method which performs calculations at each step using the results from the preceding step. Here we are going to discover an accurate and efficient raster line generating algorithm, the Bresenham's line-drawing algorithm.

 
by Dinesh Thakur Category: Line Drawing Method

DDA algorithm is an incremental scan conversion method. Here we perform calculations at each step using the results from the preceding step. The characteristic of the DDA algorithm is to take unit steps along one coordinate and compute the corresponding values along the other coordinate. The unit steps are always along the coordinate of greatest change, e.g. if dx = 10 and dy = 5, then we would take unit steps along x and compute the steps along y.

 
by Dinesh Thakur Category: Line Drawing Method

You know that a line in computer graphics typically refers to a line segment, which is a portion of a straight line that extends indefinitely in opposite directions. You can define a line by its two end points and by the line equation y = mx + c, where m is called the slope and c the y intercept of the line. Let the two end points of a line be P1(x1, y1) and P2(x2, y2). The line equation describes the coordinates of all the points that lie between the two endpoints.



 
by Dinesh Thakur Category: Line Drawing Method

A mathematical point (x, y) where x and y are real numbers within an image area, needs to be scan converted to a pixel at location (x’, y’). This may be done by making x’ to be the integer part of x, and y’ to be the integer part of y. In other words, x’ = floor(x) and y’ = floor(y),

 
by Dinesh Thakur Category: Line Drawing Method

When text or a graphic image is displayed on amonitor,or screen, the smoothness of the edges is limited by the resolution of the screen, which means the edges tend to be a little jagged. This jaggedness is also called aliasing.

 
by Dinesh Thakur Category: Line Drawing Method

A typical black-and-white photograph uses only one color. In a duotone, though, the black-and-white photograph (or other artwork) is reproduced using two colors. Perhaps it's black and brown, or black and grey, or dark grey and a rusty color. Halftone images are generated for the photograph, one slightly underexposed and one slightly overexposed, and the two are printed one on top of the other. The result can be an incredibly rich, powerful image-much richer and more interesting than the image with one color. The artist/designer has control over the values and percentages of the two different colors. It is also possible to make "tritones" using three different colors, and "quadtones," using four different colors.

 
by Dinesh Thakur Category: Line Drawing Method

On the Macintosh, some programs let you edit bitmapped graphics as FatBits. In FatBits mode, the individual dots, or pixels, making up the image are blown up so you can work with them easily, one at a time. If you see stray dots in an image you've scanned, or if a line in a picture is just slightly too thick or too skinny, it's almost impossible to make precise changes working at normal size.

 

Page 7 of 10



Subscribe To Free Daily Newsletter!

Get Free News Updates Delivered Directly To Your Inbox
About Dinesh Thakur

Dinesh ThakurDinesh Thakur holds an B.SC (Computer Science), MCSE, MCDBA, CCNA, CCNP, A+, SCJP certifications. Dinesh authors the hugely popular Computer Notes blog. Where he writes how-to guides around Computer fundamental , computer software, Computer programming, and web apps. For any type of query or something that you think is missing, please feel free to contact us.



What's New and Popular





Search Content







Advance Courses



Basic Courses



Advertise with Us